SET: 24V 5m RGBW Stripe SMD 5050 IP65 + Mi-Light 4 Zones 2.4GHz Touch Remote + 4 Zones 2.4G RGBW Controller + 24V 5A Power Supply with EU Power Cable+ 0,5m 5-PIN Adapter Cable
SET consists of all parts required for fast Connection
5m RGBW Stripe IP65 300led SMD5050
4 Zones / Groups RGBW Controller
4 Zones / Groups RGB / RGBW remote control Touch Remote
24V 5A 120W power supply
0.5m 5-pin connection cable (strip <-> controller)
Linking new lights to RF Remote Control
1. Choose which zone you want to assign the light (1 to 4)
2. Switch off the main power supply of the light in the selected zone with the main switch or pull the plug from the socket.
3. Now switch on the light again and within 3 seconds shortly press one of the 'zone on' buttons one time on the remote control.
4.when this link operation is successful, the light slowly blinks 3 times on and off.
Unlinking the Lights
1. check via the remote control to see which zone (1 to 4) is already linked to a light.
2. Switch off the main power supply of the light with the main switch or pull the plug from the socket.
3. Now switch on the light again and within 3 seconds press 5 times quickly and shortly on one of the 'zone on' buttons which you want tolink.
4. When this unlink operation is successful, the light quickly blinks 6 times on and off.
Grouping of several lights
You can add an endless numbers of lights to a zone on the 4-Channel remoteby linking the lights to different zones. This way you are completely flexible in creating different group combinations. below you can seesome grouping examples.
Tips:
To dim all RGBW lights at once or change the colorfirst press "Master ON". To do this with individual lights,first press"Zone ON". Secondly,choose the brightnessa ccording to the color ring or brightness ring.
Programs
Program 1 (RGBW Fade in Fade out)
This program fades in and fades out the color red, green, blue and white one after another.
Program 2 (color Flash)
In this program, red, green,blue, white yellow purple flashes to change.
Program 3 (Disco)
Different color strobe and flash to change.
Program 4 (Red Color Ramp up and Flash)
In this program, red color brightens from 0% - 100% and shuts down, then flashes three times.
Program 5 (Green color ramp up and flash)
In this program, green color brightens from 0% - 100% and shuts down, then flashes three times.
Program 6 (Blue color ramp up and flash)
In this program, blue color brightens from 0% -100% and shuts down, then flashes three times.
Program 7 (color change + flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and fade out)
Here different colors fade into each other.
Program 9 (Strobe white)
Just white color flashes up.
Unfortunately there are no review yet. Be the first who rate this product.
